p1010687-2000p.jpg
Haywards Pedestrian Bridge and Cycleway Fencing
 

SHARE THIS PROJECT

 

Haywards Pedestrian Bridge and Cycleway Fencing

This Project had four sections, the Pedestrian Bridge, Railway Ramp, Manor Park ramp and Stairs. 

The balustrades and Stanchions manufactured in our workshop then Zinc Metal Sprayed and a three coat paint system applied at our coating workshop. The handrails were hot dipped galvanized and then a three coat paint system applied. 

Provision was made in the metalwork for installation of LED lights and the fitting of wooden top rails.

 

CYCLEWAY FENCING

 To protect cyclists on the cycle way, Fencing was installed at any drop off point.

This involved two types of Fencing panels at 23 different sections of the cycle way.