We utilise metal spraying units with zinc aluminium for corrosion coatings.
For Abrasive Blasting we use garnet in our booth and iron sand for our fully mobile Abrasive Blasting Unit. We can offer Wet Blasting and Vacuum Blasting with an option of hot or cold water blasting from 300 PSI up to 5000 PSI. Soda blasting unit is on site for the more precise work.
The performance of any coating is directly dependent upon the correct preparation of the surface prior to coating. The most expensive and technology advanced coating system will fail if the surface is incorrect or incomplete. We use either a Special Coating Range or the reliable RESENE Coating Range applied in the correct manner to offer superior performance and end result.
The performance of any coating is directly dependent upon the correct and thorough preparation of the surface prior to coating. The most expensive and technologically advanced coating system will fail if the surface preparation is incorrect or incomplete.
Incorrect coating systems are one of the most common causes of premature coating failure. The wrong coating is used for the wrong environment either a "cheaper coating" is chosen or it is not fully understood that different paints and coating systems perform differently. You need the correct coating system for the particular environment applied in the correct manner to offer superior performance. For results that last, contact us at DUCARE NZ Ltd.